Summer Hours: Our physical store may be open sporadically on weekdays 10am- 4pm. Enjoy shopping online!

Free Shipping on All Orders (Continental US Only)

📍195 Daniel Webster Highway Nashua NH 03060

Proctor's Shop Services

SKI AND RACE SKI TUNING IN NASHUA,NH PROTORSKI.COM

If you're looking to have your skis or snowboards, tuned, waxed or sharpened, our technicians will attentively do it for you. We work restlessly to ensure timely turn-arounds

We carry the best and some of the latest equipment in the industry to make your gear look and feel new. 

All tuning works will be catered to your own needs. We tune race, park, downhill and cross-country skis. We are the experts!

Montana crystal one robot Ski tune machine available at proctor ski in Nashua NH

 

📌Did you know that tuning your skis and boards require water? And that water turns into dirty water/waste. Unlike other ski shops, we don't pour that dirty water down the drain. Here's what we do:

As we said earlier, we need water to tune your skis and snowboards to be in their best condition. The water then becomes contaminated and dirty from the ground off P-Tex and rust. As responsible individuals, we want to protect our environment as much as possible so we recycle the dirty water/waste with New England Disposal Technology. We pay them to take our 55 gallon drums and have them shipped to Ohio to clean the water.

You can check out the video on our Instagram page or click here to get redirected.

➡️ To learn more about Phantom, the eco friendly alternative to waxing, scroll to the bottom. 

Find below a list of our shop work services. If you have any questions, please feel free to contact us.

 

SKIS

SNOWBOARDS 

Proctor Special

$99.95

Crystal Grind w/Inf Wax

$69.95

Race Tune

$89.95

3M Trizact Tune

$54.95

Crystal Grind w/Inf Wax

$69.95

ASTM Binding test

$30.00

Other Shop Services

Phantom Waxless Glide

$179.00

Jr Belt tune/ Belt Wax 

$35.00

Basic Belt Grind w/Belt Wax

$49.95

Race Wax

$35.00

Edge and Wax

$30.00

Infrared Wax

$20.00




  

Detailed List of services:

1- Phantom Wax w/tune

  • We recommend this for all Skis and Boards 
    • Actually not a “wax” it is a permanent waxless glide
    • Glide lasts the entire life of the ski
    • Glides as well as all temp wax
    • Increases base resilience in our testing
    • Includes a Crystal Grind Tune
    • Ski still needs to be sharpened and ground regularly
    • Can wax over it if desired

      2- Proctor Special 

    • We recommend this for your favorite ski(s)
      • Base Precisely ground flat and blanked of existing pattern with stone
      • Base Highly Polished for efficient glide with stone
      • Deep patterned structure etched into base for wax retention with stone
      • Varied Base edge angle set and polished with stone Our Favorite Bevel
        • Base angle is steeper at tip and tail, shallower underfoot, for smooth progressive engagement
      • Side angle set to preference and polished with stone
        • We recommend 2 ° for all mountain skis
      • 3 Step wax process for maximum glide
        • Base Prep Wax
        • All Temp Glide Wax
        • Montana Win the Race Glide Additive

      3- Race Tune

       

    • For race skis
    •  

      • Base precisely ground flat and blanked of existing pattern with stone
      • Base highly polished for efficient glide with stone
      • Deep Patterned structure etched into base for wax retention and tracking properties with stone
      • Base angle set to preference and polished with stone
        • We recommend 0.5° for SL and 0.7° for GS
      • Side angle set to Preference and polished with stone
        • We recommend 3° for all race skis
      • 3 step wax process for maximum glide 
        • Base Prep Wax
        • Temperature Specific Glide Wax
        • Montana Win the Race glide additive 

      4- Crystal Grind W/ Infrared Wax

    • We recommend this for all skis and snowboards
      • Base Ground Precisely Flat with stone
      • Base Polished for efficient glide on stone
      • Fine Pattern etched into base
      • Varied base edge bevel set and polished with stone Our Favorite Bevel
        • Base edge angle is steeper at tip and tail, shallower underfoot, for smooth progressive edge engagement (Can substitute for park detune)
      • Side angle set to preference
      • We recommend 2 ° for all mountain skis and boards (Can substitute for park detune)
      • Infrared Wax application and polish
      • Use of an infrared laser to heat wax and base for maximum wax retention

      5- 3M Trizact Tune W/ Infrared Wax

    • This is for skis or boards "A step above basic"
      • Base ground smooth with sanding belt
      • Base Polished with Trizact Belt
      • Base edge angle set to preference
        • We recommend 1° for all mountain boards
      • Side edge angle set to preference 
        • We recommend 2° for all mountain skis and boards (can substitute for park detune)
      • Infrared Wax application and polish
      • Use of an infrared laser to heat wax and base for maximum wax retention

      6- Basic Belt Grind W/ Belt Wax

    • This is for skis or boards “It’ll get the job done”
      • Base ground smooth with sanding belt
      • Base edge angle set to preference 
        • We recommend 1° for all mountain skis and boards
      • Side edge angle set to preference
      • We recommend 2 ° for all mountain skis and boards
      • Wax applied with roller and polished

      7- Jr Belt Tune W/ Belt wax

    • For any ski or snowboard of manufacturer defined jr construction
      • Same process as Basic Belt Grind W/ Belt Wax

      8- ASTM Binding Test

    • We recommend testing your binding every year for safety!
      • Requires both boots and skis
      • Boots and bindings inspected for wear and damage
      • Boots and bindings cleared of debris
      • Bindings set to manufacturer recommended initial indicator value (commonly called DIN) based on your height, weight, age, skier type, and boot sole length
      • Bindings tested with boots for appropriate release value and results documented

      LAZER SKI WAX IN NASHUA, NH PROCTORSKI.COM

      Phantom Permanente Waxless Glide:
      The Future "Wax" of Snow Sports

      In the skiing community regardless if you are on a race team or if you love recreational skiing, we all love to go fast. We all love the frictionless feeling of the snow fleeting from underneath our skis while we take strong and controlled carves down the slopes. Any experienced skier can tell the difference between freshly waxed skis and skis that need to be waxed. In this community only a few of us actually love the messy application process of applying wax and then cleaning it up. The ones who do not like to wax themselves end up going to ski shops to have the service done for them. Waxing is a necessity when skiing or snowboarding and needs to be done multiple times a year in order to go fast. Unfortunately traditional waxing is very harmful to the environment due to the chemicals that are left behind in the shredded snow where it stays. When the snow melts, the wax will go into streams, rivers, lakes, oceans or any body of water below the mountains. 

      Thankfully a polymer chemist and materials engineer from The University of Utah named Jeffrey Bates who teamed up with DPS skis decided to create the future of snow sports and change the whole waxing process. The future is in Phantom Permanent Wax-less Glide which was released to the market in 2017 after years of being tested by pro skiers. Bate’s had two major goals when creating his wax like substance. One of his goals was to make it more environmentally friendly and his second goal was to make it last the lifetime of the ski. Bates was successful in achieving both of these goals. 

      The process of the Phantom Permanent Wax-less Glide is a one time activity. After the ski has been treated with the Phantom formula, it will never have to be treated again. The ski will have infinitive glide for the rest of its life time. To start the process the ski needs to be prepared. This can be done in a few different ways such as being put through a stone grinder or the ski can be thoroughly cleaned. After the ski is prepared it is the right time to apply the Phantom formula to the entire base of ski. The ski will then be placed inside the Phantom UV light machine. During this time the formula will penetrate through the pores of the P-TEX base. After the curing from the UV light the ski is ready to come out. This is the end of the process. It is time to polish off the ski and enjoy it on the snowy slopes.

       DPS recommends to have trained ski shop technicians perform this process in order for it to come out with the best results. Here at Proctor Ski & Board we have multiple technicians; Zach, James, and Keigan, who are capable to assist anyone interested in getting the lifetime Phantom Permanent Wax-less Glide done to their skis. We think that is the best form of wax. It only takes one application, lasts forever, and is friendlier to the environment.